Sound and Vibration Instrument Hire and Calibration
Norsonic 280 Specifications
| Nor 280 Noise Generator / Power Amplifier - 230 VAC | £ 12 a day * |
|---|
Output : Short-circuit and over temperature protected
Output Connector : Speakon NL4MP
Output Power : 500 W rms into 4 ohms, THD < 0.1% > 250 W rms into 8 Ω
Output Power : >1 kW Peak
Output Current : Maximum 35 A
Input : Balanced input to avoid ground loops and cross talk to signal cables
Input Sensitivity : 1 V (0 dB)
Input Impedance : 10 kΩ // 220 pF
Input Connector : 3-pin female XLR
Operating Temperature : -20 to +35 °C
Operating Humidity : 0 to 90% RH
Enclosure Class : Ip20
Power : 230 Vac ± 5%, 50 Hz
Fuse : 5A slow blow
Dimensions : 275 x 110 x 246 mm = 11 x 4.3 x 9.7 inches
Weight : 3.5 kg = 7.7 lb
The power amplifier Nor 280 is extremely powerful, so care must be taken not to destroy loudspeaker systems connected to it.
Output Connector : Speakon NL4MP
Output Power : 500 W rms into 4 ohms, THD < 0.1% > 250 W rms into 8 Ω
Output Power : >1 kW Peak
Output Current : Maximum 35 A
Input Sensitivity : 1 V (0 dB)
Input Impedance : 10 kΩ // 220 pF
Input Connector : 3-pin female XLR
Operating Humidity : 0 to 90% RH
Enclosure Class : Ip20
Fuse : 5A slow blow
Weight : 3.5 kg = 7.7 lb
The following settings should not be exceeded.
| Signal Type | Nor 213 | Nor 223 | Nor 250 |
|---|---|---|---|
| White/pink noise | -3 dB | -3 dB | 0 dB |
| Octave & third octave filtered pink noise, f< 200 Hz | -6 dB | -6 dB | -3 dB |
| Octave & third octave filtered pink noise, f> 200 Hz | -3 dB | -3 dB | 0 dB |
| Red/white noise with equalization On | -6 dB | -6 dB | -3 dB |
| Red/white noise with equalization Off | -3 dB | -3 dB | 0 dB |
